Edgar Woodson 584 Kingfisher Circle Brick, NJ 08723 USA (732) 766 3193
HomeMy QualificationsAreas ServedWhat I InspectMy PromiseStandards of PracticeAvailable ServicesWhy Inspect New Homes?Commercial InspectionsWhat Our Customers SayConsumer AlertsInspection RequestHomeownersRenovationHome SafetyHome BuyersHome SellersRealtors, Click HereContact FormLinks of InterestSearch Our SiteSite MapNACHI Certified Inspectors |
Anchor Inspection Services LLC
Inspected Once, Inspected Right!
Electromagnetic Fields (EMFs)
Can the electric and magnetic fields (EMF) to which people are routinely
exposed cause health effects? What are sources of EMFs, and when are EMFs
dangerous?
EMF (or ElectroMagnetic Field) is a broad term which includes electric fields
generated by charged particles in motion, and radiated fields such as TV, radio,
hair dryer, and microwaves. Electric fields are measured in units of volts per
meter or V/m. Magnetic fields are measured in milli-Gauss or mG. The field is
always strongest near the source and diminishes as you move away from the
source. These energies have the ability to influence particles at great
distances. For example, the radiation from a radio tower influences the atoms
within a distant radio antenna, allowing it to pick up the signal. Despite the
many wonderful conveniences of electrical technology, the effects of EMF on
biological tissue remains the most controversial aspect of the EMF issue, with
virtually all scientists agreeing that more research is necessary to determine
safe or dangerous levels.
Research since the mid-1970s has provided extensive information on biological
responses to power-frequency electric and magnetic fields. The Electric and
Magnetic Fields (EMF) Research and Public Information Dissemination (RAPID)
Program was charged with the goal of determining if electric and magnetic fields
associated with the generation, transmission, and use of electrical energy pose
a risk to human health. The fact that 20 years of research have not answered
that question is clear evidence that health effects of EMF are not obvious and
that risk relationships, if risk is identified, are not simple. Because
epidemiologic studies have raised concerns regarding the connection between
certain serious human health effects and exposure to electric and magnetic
fields, the program adopts the hypothesis that exposure to electric or magnetic
fields under some conditions may lead to unacceptable risk to human health. The
focus of the program is not only to test, as far as possible within the
statutory time limits, that hypothesis for those serious health effects already
identified, but to identify as far as possible the special conditions that lead
to elevated risk and to recommend measures to manage risk.
Electromagnetic hypersensitivity (ES) is a physiological disorder
characterized by symptoms directly brought on by exposure to electromagnetic
fields. It produces neurological and allergic-type symptoms. Symptoms may
include, but are not limited to, headache, eye irritation, dizziness, nausea,
skin rash, facial swelling, weakness, fatigue, pain in joints and/or muscles,
buzzing/ringing in ears, skin numbness, abdominal pressure and pain, breathing
difficulty, and irregular heartbeat. Those affected persons may experience an
abrupt onset of symptoms following exposure to a new EMF such as fields
associated with a new computer or with new fluorescent lights, or a new home or
work environment. Onset of ES has also reported following chemical exposure. A
concerted effort to provide scientifically valid research on which to base
decisions about EMF exposures is under way, and results are expected in the next
several years. Meanwhile, some authorities recommend taking simple precautionary
steps, such as the following:
- Increase the distance between yourself and the EMF source sit at arms length
from your computer terminal.
- Avoid unnecessary proximity to high EMF sources dont let children play
directly under power lines or on top of power transformers for underground
lines.
- Reduce time spent in the field turn off your computer monitor and other
electrical appliances when you arent using them.
The Office of Technology Assessment of the Congress of the United States
recommends a policy of prudent avoidance with respect to EMF. Prudent avoidance
means to measure fields, determine the sources, and act to reduce exposure.
- Detect EMFs in your home and work environment. It is good to know where the
sources of EMF are in your everyday world and how strong these sources are. Is
there wiring in the wall behind your bed that you dont even know about? Is the
vaporizer emitting strong fields in the babys room? How much EMF are you and
your family getting from the power lines in the street? Even hair dryers emit
EMFs. Home inspectors often have meters to measure EMFs, or they can be
purchased and shared with friends.
- Diminish your exposure to the EMFs you find. Determine how far you must stay
away from the EMF emitters in your home and work environment to achieve less
than 2.5 mG of exposurethe microwave oven, the alarm clock, the computer, and so
on. Rearrange your furniture (especially the beds, desks, and couches where you
spend the most time) away from heaters, wiring, fluorescent lights, electric
doorbells, and other EMF hot spots. Where practical, replace electric appliances
with non-electric devices. Where practical, replace electric appliances with
non-electric devices. Have an electrician correct faulty high EMF wiring and
help you eliminate dangerous stray ground currents. Consult a qualified EMF
engineer if necessary. Contact National Electromagnetic Field Testing
Association at 1-847-475-3696 for consultants in your area.
- Shield yourself. Use shielding devices on your computer screen and cellular
phone. Add shielding to your household wiring, circuit box, and transformers.
Electric fields in the home, on average, range from 0 to 10 volts per meter.
They can be hundreds, thousands, or even millions of times weaker than those
encountered outdoors near power lines. Electric fields directly beneath power
lines may vary from a few volts per meter for some overhead distribution lines
to several thousands of volts per meter for extra high voltage power lines.
Electric fields from power lines rapidly become weaker with distance and can be
greatly reduced by walls and roofs of buildings.
Magnetic fields are not blocked by most materials. Magnetic fields
encountered in homes vary greatly. Magnetic fields rapidly become weaker with
distance from the source.
The chart on the left summarizes data from a study by the Electric Power
Research Institute (EPRI) in which spot measurements of magnetic fields were
made in the center of rooms in 992 homes throughout the United States. Half of
the houses studied had magnetic field measurements of 0.6 mG or less, when the
average of measurements from all the rooms in the house was calculated (the
all-room mean magnetic field). The all-room mean magnetic field for all houses
studied was 0.9 mG. The measurements were made away from electrical appliances
and reflect primarily the fields from household wiring and outside power
lines.
If you are comparing the information in this chart with measurements in your
own home, keep in mind that this chart shows averages of measurements taken
throughout the homes, not the single highest measurement found in the home.
Magnetic fields close to electrical appliances are often much
stronger than those from other sources, including magnetic fields directly under
power lines. Appliance fields decrease in strength with distance more quickly
than do power line fields.
 |
The graph shows magnetic fields produced by
electric blankets, including conventional 110-V electric blankets as well as the
PTC (positive temperature coefficient) low-magnetic-field blankets. The fields
were measured at a distance of about 2 inches from the blankets surface, roughly
the distance from the blanket to the users internal organs. Because of the
wiring, magnetic field strengths vary from point to point on the blanket. The
graph reflects this and gives both the peak and the average
measurement. |
Anchor Inspection Services |